LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2007 >> Civic GX >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Cruise Control Systems) >> Cruise Control Actuator Test >> 2000-05 Models
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

2000-05 Models

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, 2006 Honda S2000, and 2005 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the 4P connector from the cruise control actuator.
    Fig 1: Disconnecting 4P Connector From Cruise Control Actuator (2000-05 Models)
    G03692198Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the actuator cover.
  3. Connect battery power to the No. 2 terminal of the 4P connector, and connect ground to the No. 1 terminal.
  4. Check the magnetic clutch for proper engagement. You should hear a clicking sound and the output linkage should be locked.
  5. If the output linkage is not locked, replace the cruise control actuator assembly.
  6. With power and ground still connected as in step  3, connect battery power to the No. 4 terminal and ground to No. 3 terminal, and check that the output linkage starts to turn from the fully closed position and stops at the fully opened position by the motor in the actuator.
  7. Reverse power and ground at connector terminals, No. 4 and No. 3, and check that the output linkage reverses and stops at the fully closed position.
    Fig 2: Output Linkage Stopped At The Fully Closed Position
    G03692199Courtesy of AMERICAN HONDA MOTOR CO., INC.
  8. If the output linkage moves sluggishly, or the motor does not operate properly, replace the cruise control actuator assembly.
scientia non olet · About LEMON Manuals