LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2007 >> CR-V EX, 2.4 RE3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Electronic Throttle Control System) >> Throttle Actuator Control Module Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Throttle Actuator Control Module Replacement

WARNING: This page is about a different car, the 2006 Honda CR-V and 2005 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the glove box (see GLOVE BOX REMOVAL/INSTALLATION ).
  2. Push the tab (A), and disconnect the throttle actuator control module 16P connector (B).
    Fig 1: Disconnecting Throttle Actuator Control Module 16P Connector
    G03674176Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the bolts (C), and the throttle actuator control module (D).
  4. Install the control module in the reverse order of removal.
scientia non olet · About LEMON Manuals