Passenger's Window Switch Test/ Replacement

Remove the passenger's door panel (see DOOR PANEL REMOVAL/INSTALLATION ).
Disconnect the 5P connector (A) from the passenger's power window switch (B).

Fig 1: Disconnecting 5P Connector From Passenger's Power Window Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each switch position according to the table.

Fig 2: Power Window Switch Terminals Continuity Checking Reference Table
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the continuity is not as specified, remove the two screws and replace the switch.