LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2006 >> CR-V SE >> Repair and Diagnosis >> Engine Mechanical >> Engine Cooling Fan >> Radiator Fan Switch Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Radiator Fan Switch Replacement

  1. Drain the engine coolant (see COOLANT CHECK ).
  2. Disconnect the radiator fan switch connector, then remove the radiator fan switch (A).
    Fig 1: Disconnecting Radiator Fan Switch Connector With Torque Specifications
    G03673885Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the radiator fan switch with a new O-ring (B).
  4. Fill the reserve tank and radiator with engine coolant, and bleed the air from the cooling system with the heater valve open (see step 8 on COOLANT REPLACEMENT ).
scientia non olet · About LEMON Manuals