October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal and Installation

How to Remove the ECM/PCM Connectors for Testing

If DTC troubleshooting requires voltage or resistance checks at the ECM/PCM connectors, remove the ECM/PCM connectors and test it:

1. Jump the SCS line with the HDS.

2. Remove the center lower cover (A).
3. Remove the duct (B).
4. Disconnect ECM/PCM connectors (C).
5. Open the SCS line with the HDS.