Passenger's Window Motor Test

Remove the door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
Disconnect the 6P connector (A) from the window motor.

Fig 1: Disconnecting 6P Connector From Window Motor (Front And Rear Passenger's)
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Test the motor by connecting battery power and ground according to the table shown in Fig 2. When the motor stops running, disconnect one lead immediately.

Fig 2: Connecting Battery Power And Ground Table
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the motor does not run or fails to run smoothly, replace it.