October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Connecting Rod

Line up the mark (A) on the connecting rod and cap then install the cap.

Apply engine oil to the bolt threads.

Torque the bolts (B) to 20 Nm (2.0 kgf-cm, 14 ft. lbs.).

Mark the connecting rod (A) and bolt head (B) as shown.

Tighten the bolt until the mark on the bolt head lines up with the mark on the connecting rod (turn the bolt 90°).