Rear Window Motor Test

Remove the side trim panel (see TRIM REMOVAL/INSTALLATION - REAR SIDE LOWER AREA ).
Disconnect the 2P connector from the rear window motor.

Fig 1: Disconnecting 2P Connector From Rear Window Motor
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check window motor operation by connecting power and ground according to the table. When the motor stops running, disconnect one lead immediately.

Fig 2: Checking Window Motor Operation By Connecting Power & Ground Table
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the motor does not run or fails to run smoothly, replace it.