LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 2000 >> Insight >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Continuously Variable Automatic Transmission (CVT)) >> A/T Interlock System >> Shift Lock Solenoid Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Shift Lock Solenoid Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 Honda Insight, 2005 Honda Insight, 2004 Honda Insight, 2003 Honda Insight, and 2002 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front console (see FRONT CONSOLE REMOVAL/INSTALLATION ).
  2. Disconnect the shift lock solenoid connector.
  3. Pry the shift lock solenoid clamp (A) with a screwdriver, and remove it.
    Fig 1: Removing Shift Lock Solenoid
    G03682081Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the shift lock solenoid.
  5. Install the shift lock solenoid plunger (B) and plunger spring (C) in the new shift lock solenoid (D).
  6. Install the shift lock solenoid by aligning the joint of the shift lock solenoid plunger with the tip of the shift lock stop (E).
  7. Secure the shift lock solenoid with the solenoid clamp.
  8. Connect the shift lock solenoid connector.
  9. Install the front console (see FRONT CONSOLE REMOVAL/INSTALLATION ).
scientia non olet · About LEMON Manuals