Blower Switch
WARNING: This page is about a different car, the 1998 Honda Prelude. However, it is still accessible from the selected car via links, so may be relevant.
Remove blower switch. Check for continuity between specified terminals of blower switch. See BLOWER SWITCH TEST table. See Fig 1 . If continuity does not exist, replace blower switch.
BLOWER SWITCH TEST
| Switch Position | Continuity Should Exist Between Terminal No. | ||
|---|---|---|---|
| OFF | (1) | ||
| Low | 4, 5 & 6 | ||
| Medium-Low | 1, 4 & 6 | ||
| Medium-High | 2, 4 & 6 | ||
| High | 3, 4 & 6 | ||
|
|||