LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 1997 >> Prelude Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Electronic Ignition System >> Ignition Coil Resistance (Internal Coil)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Ignition Coil Resistance (Internal Coil)

  1. Turn ignition off. Remove distributor cap. Remove primary leads from ignition coil. Using an ohmmeter, check primary resistance between ignition coil terminals "A+" and "B-". See Fig 1 . Resistance should be as specified. See IGNITION COIL RESISTANCE  .
  2. Check secondary resistance between ignition coil terminal "A" (+) and secondary output terminal (coil tower). See IGNITION COIL RESISTANCE  . If readings are not as specified, replace ignition coil.
    Fig 1: Identifying Typical Internal Ignition Coil Terminals
    G96B09586Courtesy of AMERICAN HONDA MOTOR CO., INC.
    IGNITION COIL RESISTANCE - Ohms @ 68°F (20°C)

    Application Primary Secondary
    Prelude .64-.78 14,400-21,600
scientia non olet · About LEMON Manuals