LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 1995 >> Prelude VTEC >> Repair and Diagnosis >> Electrical >> Starter >> Bench Testing >> Brush Holders Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Brush Holders Test

  1. Using an ohmmeter, check continuity between positive and negative brush holders (brackets). Continuity should not exist. If continuity exists, brush holder assembly is shorted and must be replaced.
  2. Check brush length and spring tension. If brush length or spring tension is less than specification, replace brushes. See appropriate table underSTARTER SPECIFICATIONS  . Ensure brushes move freely in holders.
scientia non olet · About LEMON Manuals