LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Honda >> 1993 >> Prelude VTEC >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Starter >> Bench Testing >> Solenoid Tests >> Pull-In Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Pull-In Test

Check continuity between starter solenoid terminals "S" and "M". See Figure. If continuity exists, pull-in coil is okay. If continuity does not exist, replace starter solenoid.

scientia non olet · About LEMON Manuals