LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1995 >> Metro L4-079 1.3L VIN 9 TBI >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Testing and Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Camshaft Position Sensor: Testing and Inspection

Measuring Camshaft Position (CMP) Sensor Resistance:






MEASURING CAMSHAFT POSITION SENSOR RESISTANCE

TOOL REQUIRED
J 39200 Digital Multimeter

PROCEDURE
Using a J 39200 digital multimeter, measure resistance of the camshaft position (CMP) sensor between the two terminals of the distributor connector. If the resistance is not 205 to 255 ohms, the CMP sensor must be replaced.

scientia non olet · About LEMON Manuals