LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1994 >> Metro Base, 2D Hatchback, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator & Regulator >> On-Vehicle Testing >> Rotor Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Rotor Test

  1. Using an ohmmeter, measure resistance between rotor and slip rings. See Fig 1 (STEP 1). If continuity exists, replace rotor.
  2. Measure resistance between slip rings. See Fig 1 (STEP 2). If resistance is not 2.8-3.0 ohms, replace rotor.
Fig 1: Testing Alternator Rotor (Nippondenso Shown, Mitsubishi Similar)
G91H02012Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals