LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1993 >> Prizm Base, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Starter >> Bench Testing >> Starter Component Inspection >> Commutator
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Starter Component Inspection: Commutator

  1. Using "V" blocks and dial indicator, check commutator runout (out-of-round). Ensure runout is not more than .002"(.05 mm). Turn commutator/armature on lathe until runout (out-of-round) is within specification.
  2. Check diameter commutator. Commutator should not be less than specification. See MINIMUM COMMUTATOR SPECIFICATIONS  table. If commutator is cut down more than .008" (.20 mm), undercut insulating mica to depth of .015-.031" (.38 -.78 mm).
scientia non olet · About LEMON Manuals