LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Geo >> 1992 >> Prizm Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Distributor >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

  1. Disconnect negative battery cable. Remove distributor cap. See Figure and Figure . Mark distributor-to-engine position and distributor rotor-to-distributor housing position for installation reference. Remove distributor harness connector and hold-down bolt. Remove distributor.
  2. DO NOT  rotate crankshaft with distributor removed or reference marks will be incorrect. To install distributor, use reference marks and reverse removal procedure.
scientia non olet · About LEMON Manuals