October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Servo Assembly
- Install servo apply rod, spring and piston into case using a liberal amount of transmission fluid. Compress servo piston spring and install retaining ring while lightly tapping piston until piston is seated.
- To adjust servo, use a 3/16" hex head wrench on servo adjusting bolt and tighten bolt to 40 INCH lbs. (4.5 N.m.). Back off bolt EXACTLY 5 turns. Hold adjusting bolt stationary and tighten lock nut.