LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2023 >> G70 2.0T, RWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Tires/Wheels/Alignment >> Wheel >> Repair Procedures >> Run Out Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Run Out Inspection

  1. Jack up the vehicle.
  2. Measure the wheel run-out by using a dial indicator as shown below.
    Run-out Aluminum
    Radial mm (in.) Below 0.3 (0.0118)
    Lateral mm (in.) Below 0.3 (0.0118)
  3. If measured value exceeds the standard value, replace the wheel.
    G15588642Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals