LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2023 >> G70 2.0T Sport Prestige, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Adjustment >> ETC module learning procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

ETC module learning procedure

Be sure to perform the ETC module learning procedure when replacing or reinstalling the ETC module.

  1. Wait for 1 minute with the ignition switch ON.
  2. Start the engine and hold the idle status for 15 minutes.
  3. Wait for 1 minute with the ignition switch OFF.
  4. Restart the engine, and check that the idle speed is stable.
NOTE:
  • If the ETC module learning procedure is not performed after replacing or reinstalling it, MIL illumination with DTCs may occur.