Repair Procedures: Inspection
Information
- Inspect the connector thoroughly for looseness, poor connection, bending, corrosion, contamination, deformation, or damage.
- Disconnect the parking switch connector.
- Turn Ignition "ON", & engine "OFF".
- Measure the each signal in "P" range or "not p" range.
Signal code table
| Signal | P | Not P |
|---|---|---|
| S1 | 10 - 38.4% | 41.1 - 90% |
| S2 | 90 - 61.6% | 58.9 - 10% |