DTC Setting Condition

Trouble shooting	Condition	Possible Cause
Main action	Monitor the FCA module variant coding	Error in specifications Error in vehicle assembly Variant coding was not conducted
Prerequisite condition	Battery Voltage is between 9V and 16V Ignition has been on for over 2 sec CAN communication lines are normal
Threshold Value	Variant coding is not completed or Variant coding does not correspond to vehicle data Case 1) Variant coding is not conducted Case 2) When a CAN message is received from the LKA after a setting where FCA does not apply
Diagnosis Time	6 seconds
MIL	FCA/SCC operation cancelled/inhibited FCA/SCC warning lamp ON