LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2021 >> G90 3.3T Premium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Steering Column Module Diagnosis) >> DTC B1602-00: CAN Line Error >> Verification Of Repair >> Verification Of Vehicle Repair
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Verification Of Vehicle Repair

WARNING: This page is about a different car, the 2022 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scan tool and select "Diagnostic Trouble Codes (DTC)" mode.
  2. Using a scan tool, clear the DTC.
  3. Operate the vehicle within DTC Enable conditions in General information.
  4. Are any DTC present?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • System is performing to specification at this time.
scientia non olet · About LEMON Manuals