LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2019 >> G80 5.0 Ultimate, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 5.0L (3 Of 3) >> DTC P262B: Control Module Power Off Timer Performance >> DTC Information >> DTC Detecting Condition
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy * Engine-off timer 1. Poor connection
2. Low battery voltage
Case1 Enable Condition * Meets warm-up conditions in previous driving cycles
- Coolant temperature is higher than 70°C(158°F)
- Difference between the intake air temperature and the intake air temperature when IG ON is 0°C(32°F) or more
- Difference between the cooling water temperature and the cooling water temperature when IG ON is 40°C(104°F) or more
Threshold Value
Case2 Enable Condition * Meets warm-up conditions in previous driving cycles
- Coolant temperature is higher than 70°C(158°F)
- Difference between the intake air temperature and the intake air temperature when IG ON is 40°C(104°F) or less
- Difference between the cooling water temperature and the cooling water temperature when IG ON is 20°C(68°F) or less
Threshold Value * Engine off timer on key off too fast to exceed specification
Diagnosis Time * 10 msec (once per driving cycle)
MIL On Condition * 2 Driving Cycles