LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2019 >> G70 2.0T Dynamic, AWD >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Front Driveshaft Assembly >> BJ Boot >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

  1. Remove the front driveshaft.

    (Refer to Driveshaft Assembly - "FRONT DRIVESHAFT ")

  2. Remove the TJ joint assembly.

    (Refer to Driveshaft Assembly - "TJ JOINT ")

  3. Remove the BJ boot band (A) by using the driver (-).
    G13540278Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the BJ boot.
  5. Install in the reverse order of removal.
    NOTE:
    • The boot band should be replaced with a new one.
    • Do not disassemble the BJ assembly.
scientia non olet · About LEMON Manuals