LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2019 >> G70 2.0T Dynamic, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Module Diagnosis >> DTC B1212-00: Front Center Right Sensor Fault >> DTC Information And Inspection >> Monitor DTC Status
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Monitor DTC Status

  1. Connect the GDS and select "System". → "BCM". → "Diagnostic Trouble Codes (DTC)".
  2. Click the "DTC Status" to check the DTC information.
  3. Read the "DTC Status" parameter, and Record all DTCs, DTC state and freeze frame data.
  4. Is the same DTC set again?

    YES 

    NO 

    • This can be BCM* memory was not cleared after repair.

      → Erase the DTCs, and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    • This can be an intermittent fault caused by Poor Contact in Front Center Right Sensor*'s and/or BCM*'s connector.

      → Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.

      → Repair or replace the harness/connector as necessary, and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

NOTE: BCM*: "IBU".
Front Center Right Sensor*: "PARKING DISTANCE WARNING FORWARD RH (IN)".
scientia non olet · About LEMON Manuals