Front Door Lock Module Inspection
- Remove the front door trim.
(Refer to Body - "FRONT DOOR TRIM ")
- Remove the front door module.
(Refer to Body - "FRONT DOOR MODULE ")
- Disconnect the connectors from the actuator.
- Check actuator operation by connecting power and ground as shown below. To prevent damage to the actuator, apply battery voltage only momentarily.
[Central lock]
[Dead lock + Key switch]
[Dead lock]
- Perform the cinching reset procedure in case of faulty operation of the cinching of the power door latch (automatic full latching). (1) Cinching reset procedure is completed by "Remove power door fuse → Install power door fuse → IGN ON".
| Power door fuses | Fuse mounting location |
|---|---|
| Driver's seat | Front Smart Junction Box |
| Passenger |