Repair Procedures: Inspection
WARNING: This page is about a different variant/trim than selected.
- Connect the GDS on the Data Link Connector (DLC).
- Measure the output voltage of the MAPS during idle with IG ON.
| Pressure (kPa) |
Output Voltage (V) [Vref=5V] |
| 20 |
0.5 |
| 40 |
0.79 |
| 80 |
1.36 |
| 120 |
1.93 |
| 160 |
2.5 |
| 200 |
3.07 |
| 220 |
3.36 |
| 240 |
3.64 |
| 280 |
4.21 |
| 300 |
4.5 |