Repair Procedures: Removal
CAUTION:
- Take care not to scratch the crash pad and related parts.
- Eject all discs before removing the AVN head unit not to damage the DVD player's load mechanism.
- Disconnect the negative (-) battery terminal.
- Remove the crash pad side garnish assembly.
(Refer to Body - "CRASH PAD SIDE GARNISH ASSEMBLY ")
CAUTION: In case of working on the non-gloss timber trimming, special care shall be given to the following.- When removing with the screwdriver or remover, wrap the protective tape on the tools.
- Be careful not to damage parts because the non-gloss timber trim is easily scratched or picked.
- Be careful to store and handle the crash pad when removing/installing because lubricant and oil can leave a stain on the trim.
- Remove the heater control unit and center fascia panel assembly.
(Refer to Body - "HEATER & A/C CONTROL UNIT ")
- Remove the AVN Head Unit (A) after loosening the mounting bolts and nuts.
- Remove the AVN Head Unit connectors and cables (A).
CAUTION:
- If DVD does not eject, don't try to remove it.
- The DVD player may get damaged.
- Contact the nearest Dealer for assistance.