LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2017 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 316 (Engine Control System) >> Barometric Pressure Sensor (BPS) >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the barometric pressure sensor connector (A).
  3. Remove the mounting bolt (B) and then remove the sensor from the air cleaner assembly.
Fig 1: Locating Barometric Pressure Sensor Connector And Mounting Bolts
G11856637Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals