Repair Procedures: Installation

WARNING: This page is about a different car, the 2016 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

Fix the brake pedal arm and insert fully the brake switch so that the contact part is invisible.

Fig 1: Fixing Brake Pedal Arm
Courtesy of KIA MOTORS AMERICA, INC.
After inserting, turn the brake switch 45° clockwise, and then assemble locking plate by pushing.

Fig 2: Turning Brake Switch 45° Clockwise
Courtesy of KIA MOTORS AMERICA, INC.
Confirm the gap between brake switch and bracket.
Brake Clearance (A):

1.0 ~ 2.0 mm (0.04 ~ 0.08 in.)

Fig 3: Checking Gap Between Brake Switch And Bracket
Courtesy of KIA MOTORS AMERICA, INC.
Connect the brake switch connector (A).

Fig 4: Connecting Brake Switch Connector

Courtesy of KIA MOTORS AMERICA, INC.