LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Genesis >> 2017 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (Body Control Module (BCM) Diagnosis) >> DTC B2801-00: MM CAN Single Line Error >> Verification of Repair >> Verification of Vehicle Repair
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Verification of Vehicle Repair

WARNING: This page is about a different car, the 2016 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and select "Diagnostic Trouble Codes (DTC)" mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General Information in this procedure.
  3. Is any DTC set again?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • System performing to specification at this time.