Repair Procedures: Removal

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")
CAUTION:
- When removing the fuel pump relay, a Diagnostic Trouble Code (DTC) may occur. Delete the code with the GDS after completion of "RELEASE RESIDUAL PRESSURE IN FUEL LINE " work.
Remove the fuel pump.
(Refer to Fuel Delivery System - "FUEL PUMP ")
Disconnect the fuel sender connector (A).

Courtesy of
Remove the fuel sender (A) after releasing the fixing hook.

Courtesy of

Courtesy of