Repair Procedures: Removal
CAUTION:
Take care not to scratch the crash pad and related parts.
- Disconnect the negative (-) battery terminal.
- Remove the crash pad side garnish assembly.
(Refer to Body - "CRASH PAD SIDE GARNISH ASSEMBLY ")
CAUTION: In case of working on the non-gloss timber trimming, special care shall be given to the following.- - When removing with the screwdriver or remover, wrap the protective tape on the tools.
- - Be careful not to damage parts because the non-gloss timber trim is easily scratched or picked.
- - Be careful to store and handle the crash pad when removing/installing because lubricant and oil can leave a stain on the trim.
- Remove the fascia panel monitor.
(Refer to Body - "CRASH PAD MAIN LOWER ASSEMBLY ")
- Remove the front LCD monitor after loosening the mounting screws.