Installation Procedure
Evaporative Emission Canister Purge Solenoid Valve (2) - Install
- Evaporative Emission Canister Purge Solenoid Valve Bolt (1) - Install and tighten - Fastener Specifications
Air Cleaner Outlet Duct (1) - Install
Air Cleaner Outlet Duct Clamp (2) - Tighten - Fastener Specifications
- Evaporative Emission Canister Purge Tube (1) - Connect - Plastic Collar Quick Connect Fitting Service
- Connect the electrical connector.
Air Cleaner Outlet Duct Clamp (3) - Tighten - Fastener Specifications
- Positive Crankcase Ventilation Tube (2) - Connect - Plastic Collar Quick Connect Fitting Service
- Air Cleaner Outlet Duct Nut (1) - Install and tighten [2x] - Fastener Specifications
{If equipped} Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Install
If equipped, push down on the front of the intake manifold cover (2).
- {If equipped} Intake Manifold Cover Bolt (1) - Install and tighten [2x] - Fastener Specifications
CAUTION:
Refer to Fastener Caution .