Removal Procedure
- Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection
Plenum Front Panel Outer Reinforcement (1) - Remove - Plenum Front Panel Removal and Installation (UXA) , or Plenum Front Panel Removal and Installation (-UXA)
{If equipped} Intake Manifold Cover Bolt (1) - Remove [2x]
- If equipped, lift up on the front of the intake manifold cover (2).
{If equipped} Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Remove
Fuel Pump Shield Bolt (1) - Remove [2x]
- Fuel Pump Shield Bolt (2) - Remove [2x]
- Fuel Injection Pump Bracket (3) - Remove
- WARNING:
The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise canceling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage, and possible injury or death.
Fuel Pump Insulator (1) - Remove