Removal Procedure
- Reposition the inside rearview mirror.
Using a flat-bladed plastic trim tool, release the retaining clips.
- Windshield Multifunction Sensor Mount Bracket Cover Insert (1) - Remove
Using a suitable plastic trim tool, carefully pry downward on the windshield multifunction sensor mount bracket cover (1) to release it from the windshield.
- Windshield Multifunction Sensor Mount Bracket Cover (1) - Remove
- NOTE:
Some components not shown for graphic clarity.
Disconnect the electrical connector.
- Release the retaining tabs.
- Slide the front view camera (1) upward to release.
- Front View Camera (1) - Remove
NOTE:
Observe the mounting and location of the front view camera to ensure proper reinstallation.