Side Obstacle Detection Control Module Replacement

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts items in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedure Rear Bumper Fascia Removal and Installation
1	Side Object Sensing Alert Module Bolt CAUTION: Fastener Caution Tighten 2.5 N.m (22 lb in)
2	Side Object Sensing Alert Module Procedure Disconnect the electrical connectors. Perform the necessary programming and setup procedure: Control Module References

Callout

Component Name

Side Object Sensing Alert Module Bolt

CAUTION:

Tighten
2.5 N.m (22 lb in)

Side Object Sensing Alert Module

Procedure

Disconnect the electrical connectors.
Perform the necessary programming and setup procedure: Control Module References