LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2021 >> Yukon AT4 >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Cellular, Entertainment, And Navigation - Repair Instructions >> Repair Instructions >> Communication Interface Module Battery Replacement >> Installation Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

  1. GM5000044Courtesy of GENERAL MOTORS COMPANY

    Communication Interface Module Battery (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Communication Interface Module Battery Bolt (1) - Install and tighten - Fastener Specifications
  3. GM5537641Courtesy of GENERAL MOTORS COMPANY

    Telematic Control Module (1) - Install

  4. Connect the electrical connectors.
  5. GM5568663Courtesy of GENERAL MOTORS COMPANY
    WARNING:

    Upon installing the floor duct to the side of the HVAC case, it is necessary to verify duct opening is completely installed, surrounding the HVAC case outlet port. Failure to do so could result in the duct falling downward, with the potential to interfere with driver's legs and gas/brake pedal operation.

    Floor Front Air Outlet Duct - Left Side (1) - Install

  6. GM5002004Courtesy of GENERAL MOTORS COMPANY

    Floor Front Air Outlet Duct Bolt (1) - Install and tighten - Fastener Specifications

  7. GM5515685Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Trim Panel Insulator (1) - Install

  8. GM5515684Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Insulator Retainer (1) - Install [ 2x ]

  9. Perform the necessary programming and setup procedure: Control Module References
scientia non olet · About LEMON Manuals