Diagnostic Aids

Ideal conditions to reduce the time needed for the Video Processing Control Module to complete the calibration include:

• All moving points of vehicle access (doors, trunk/liftgate, fuel door, hood, etc) of the vehicle Must  be closed and the corresponding vehicle access systems functional (no DTCs, etc).
• No vehicle body or structural damage that may affect proper camera mounting or line of sight
• All surround vision cameras properly mounted, fully connected, and appropriately connected to the proper terminal of the Video Processing Control Module.
• Vehicle driven reasonably flat and straight for at least 0.5 km (0.3 miles)
• Vehicle speed between 10-30 kph (6-19 mph)
• Steering wheel angle less than 0.5°
• It is a good practice to wipe camera lens' clean prior to alignment
• Vehicle should not be within 1.5 meters (5 feet) of a curb or roadside
• Dry weather, cloudy but bright sky