Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the cooling system. Cooling System Draining and Filling (LSY GE 47716) , or Cooling System Draining and Filling (LSY Static Fill) , or Cooling System Draining and Filling (LGY Static Fill) , or Cooling System Draining and Filling (LGY GE 47716) , or Cooling System Draining and Filling (LT4 Static Fill) , or Cooling System Draining and Filling (LT4 GE 47716)
Intake Manifold (1) - Remove - Intake Manifold Replacement
Hose Clamp (1) - Disengage [2x] - Hose Clamp Replacement Guidelines - Spring Type
- Thermostat Bypass Hose (2) @Engine Coolant Flow Control Valve - Remove
- Radiator Inlet Hose (3) @Engine Coolant Flow Control Valve - Remove
Hose Clamp (1) - Disengage [3x] - Hose Clamp Replacement Guidelines - Spring Type
- Engine Coolant Air Bleed Hose (2) @Engine Coolant Flow Control Valve - Remove
- Engine Coolant Air Bleed Hose (3) @Engine Coolant Flow Control Valve - Remove
- Engine Oil Cooler Coolant Inlet Hose (4) @Engine Coolant Flow Control Valve - Remove
Electrical Connector (1) @Engine Coolant Flow Control Valve - Disconnect [2x]
- Electrical Connector (2) @Engine Coolant Temperature Sensor - Disconnect
Engine Coolant Flow Control Valve Bolt (1) - Remove [4x]
Engine Coolant Flow Control Valve (1) - Remove
- Water Outlet Seal (2) - Remove and DISCARD