LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2018 >> Canyon SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Replacement (LWN) >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

WARNING: This page is about a different car, the 2017 GMC Canyon and 2017 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection 
    2. Fig 1: Charge Air Cooler Outlet Duct
    GM4139728Courtesy of GENERAL MOTORS COMPANY
  2. Remove Charge Air Cooler Outlet Duct (3)Charge Air Cooler Outlet Duct Replacement
    3. Fig 2: Engine Coolant Fan Rear Shroud Upper Bolts
    GM4167477Courtesy of GENERAL MOTORS COMPANY
  3. Remove the engine coolant fan rear shroud upper bolts. (1)Engine Coolant Fan Rear Shroud Replacement (LWN)
    4. Fig 3: Drive Belt
    GM4144712Courtesy of GENERAL MOTORS COMPANY
  4. Remove Drive Belt (2)Drive Belt Replacement
    5. Fig 4: Generator Terminal Protective Boot
    GM4154242Courtesy of GENERAL MOTORS COMPANY
  5. Remove Generator Terminal Protective Boot (1)
  6. Remove Generator Nut (2)
  7. Remove Battery Positive Cable (3)
  8. Disconnect the electrical connector.(4)
    9. Fig 5: Generator And Generator Bolt
    GM4154245Courtesy of GENERAL MOTORS COMPANY
  9. Remove Generator Bolt (1)
  10. Remove the generator.(2)
scientia non olet · About LEMON Manuals