LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2017 >> Yukon SLE, RWD, Gas >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> K71 Transmission Control Module: Programming and Setup >> Programming an Existing or New Control Module
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Programming an Existing or New Control Module

To program an existing or new control module, perform the following procedure:

  1. Install the special tool:EL-49642 SPS Programming Support Tool
  2. Ignition - On / Vehicle - In Service Mode
  3. Access SPS and follow the on-screen instructions for the control module:K71 Transmission Control Module - Programming
  4. After the programming is complete, select:Each available option in order from the Select Functions / Sequence Menu

    If setup is not an available option - Perform the appropriate learn/reset procedure with the scan tool

    For more information see:Solenoid Valve Characterization Reprogramming

  5. Clear DTCs after programming is complete. Clearing powertrain DTCs will set the Inspection/Maintenance (I/M) system status indicators to No.
scientia non olet · About LEMON Manuals