LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2017 >> Canyon SL >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Positive Cable Replacement (LCV) >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
    2. Fig 1: Fuse Block Cover And Battery Positive Cable Fastener
    GM3790841Courtesy of GENERAL MOTORS COMPANY
  2. Remove the fuse block cover (3) and remove the battery positive cable fastener (2) from the fuse block stud.
  3. Remove the battery positive cable (1) from the fuse block.
    4. Fig 2: Junction Block Cover And Battery Positive Cable Fastener
    GM3790843Courtesy of GENERAL MOTORS COMPANY
  4. Remove the junction block cover (3) and remove the battery positive cable fastener (2).
  5. Remove the battery positive cable (1) from the junction block stud.
  6. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  7. Remove the steering gear skid shield. Refer to Steering Gear Skid Shield Replacement (without ZR2)Steering Gear Skid Shield Replacement (with ZR2) .
    8. Fig 3: Protective Boot And Battery Positive Cable Fastener
    GM3791032Courtesy of GENERAL MOTORS COMPANY
  8. Slide the protective boot (3) away from the generator stud and remove the battery positive cable fastener (1).
  9. Remove the battery positive cable (2) from the generator stud.
    10. Fig 4: Battery Positive Cable Fastener
    GM3791038Courtesy of GENERAL MOTORS COMPANY
  10. Remove the battery positive cable fastener (1) and remove the battery positive cable (3) from the starter solenoid (2).
  11. Lower the vehicle.
    12. Fig 5: Battery Positive Cable Retainer Fastener And Battery Positive Cable
    GM3791091Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Note the routing of the battery positive cable within the engine compartment.

  12. Remove the battery positive cable retainer fastener (1) and remove the battery positive cable (2) from the engine compartment.
scientia non olet · About LEMON Manuals