LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2016 >> Canyon SL >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Replacement (LWN) >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

  1. Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection 
  2. Raise and support the vehicle. Lifting and Jacking the Vehicle
  3. Remove Front Wheelhouse Liner. Front Wheelhouse Liner Replacement
  4. Remove Oil Level Indicator Tube.Oil Level Indicator Tube Replacement
    5. Fig 1: Starter Solenoid Cable Nut And Cable
    GM4143720Courtesy of GENERAL MOTORS COMPANY
  5. Remove Starter Solenoid Cable Nut (1).
  6. Remove Remove Starter Solenoid Cable (2).
  7. Disconnect the electrical connector (3).
    8. Fig 2: Fuel Pump Fuel Feed Pipe Bracket Bolt
    GM4339363Courtesy of GENERAL MOTORS COMPANY
  8. Remove Fuel Pump Fuel Feed Pipe Bracket Bolt (2)
  9. Reposition away Fuel Pump Fuel Feed Pipe Bracket (1)
    10. Fig 3: Starter Mounting Bolt
    GM4143721Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The heater hoses will need to be carefully pushed upwards to allow the starter room to be moved.

  10. Remove Starter Mounting Bolt (1)
    11. NOTE:

    Remove the starter through the wheelhouse

  11. Remove Starter (2)
scientia non olet · About LEMON Manuals