September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
.
Courtesy of GENERAL MOTORS COMPANY
- Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation
.
- Disconnect the wheel speed sensor electrical connector (1).
- Release the wheel speed sensor wire harness grommet (2) from the lower control arm bracket.
- Release the wheel speed sensor wire harness routing clips (3) from the upper suspension link.
- Remove the wheel speed sensor bolt.
Courtesy of GENERAL MOTORS COMPANY
NOTE:
Clean the wheel speed sensor mounting area on the wheel knuckle of any accumulated dirt and debris.
- Pull the wheel speed sensor straight up and out of the wheel knuckle.