LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2013 >> Yukon Base, 4WD >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed And MOVEABLE Window System >> Diagnostic Information and Procedures >> DTC B3205 >> Component Testing
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Component Testing

  1. Ignition OFF, disconnect the harness connector at the appropriate window motor.
  2. Install a 25 A fused jumper wire between one of the control terminals and 12 V. Momentarily install a jumper wire between the other control terminal and ground. Reverse the jumper wires at least two times, the window motor should perform the UP and DOWN functions.
    • If it does not perform as specified, replace the window motor.