LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2013 >> Sierra 1500 XFE >> Repair and Diagnosis >> External Pages >> Different car >> Section 2313 (Data Communications System) >> Repair Instructions >> Body Control Module Bracket Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Body Control Module Bracket Replacement

WARNING: This page is about a different car, the 2012 GMC Sierra, 2012 GMC Cab & Chassis Sierra, 2012 Chevrolet Silverado, and 2012 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Floor Heater Duct Retainer And BCM Bracket
GM1809306Courtesy of GENERAL MOTORS COMPANY
Body Control Module Bracket Replacement

Callout Component Name

Preliminary Procedure

  1. Remove the knee bolster panel. Refer to Knee Bolster Replacement (With RPO SLT) , Knee Bolster Replacement (Without RPO SLT) .
  2. Remove the instrument panel driver knee bolster deflector. Refer to Instrument Panel Driver Knee Bolster Deflector Replacement (Without RPO SLT) , Instrument Panel Driver Knee Bolster Deflector Replacement (With RPO SLT) .
1 Front Floor Heater Duct Retainer
2 Body Control Module Bracket Screws (Qty: 3)
CAUTION:

Refer to Fastener Caution .


Tighten 
2 N.m (18 lb in)
3 Body Control Module Bracket Assembly
scientia non olet · About LEMON Manuals