LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2011 >> Canyon 4D Pickup, 5.3 P, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 5.3L - Repair Instructions >> Repair Instructions >> Knock Sensor 1 Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: Locating Knock Sensor 1
    GM1352025Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the engine wiring harness electrical connector from the KS (2).
  3. Remove the KS retaining bolt.
  4. Remove the KS (2) from the engine block.
scientia non olet · About LEMON Manuals