LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2009 >> Canyon 2D Pickup, 3.7 E, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Data Communication System >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

    Fig 1: View Of BCM
    GM1283835Courtesy of GENERAL MOTORS CORP.
  1. Position the BCM to the vehicle.
  2. Attach the BCM to the hinge pillar with the integral tab.
  3. Install the 2 fasteners retaining the BCM to the hinge pillar.
    4. Fig 2: View Of Detached Body Wiring Harness Electrical Connector
    GM1283832Courtesy of GENERAL MOTORS CORP.
  4. Install the fastener retaining the body wiring harness electrical connector to the BCM.
    5. Fig 3: View Of Body Wiring Harness Electrical Connector
    GM1283827Courtesy of GENERAL MOTORS CORP.
  5. Connect the body wiring harness electrical connector (1) to the BCM.
    6. Fig 4: View Of I/P Wiring Harness Electrical Connector
    GM1283829Courtesy of GENERAL MOTORS CORP.
  6. Connect the I/P wiring harness electrical connector (1) to the BCM.
  7. Install the right front hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement - Right Side .
  8. If installing a replacement BCM, program the BCM. Refer to Control Module References .
scientia non olet · About LEMON Manuals